China butt welded gate valve manufacturer & supplier

high temperature and high pressure power station gate valve

Body :WCB, WC6,WC9
Disc :WCB, WC6,WC9
Bonnet:25,12Cr1Mo1VA
Stem: 1Cr17Ni2 ,20Cr1Mo1VA
Seat: 25, 12Cr1Mo1VA

2016-12-10

high temperature and high pressure power station globe valve

1, the welding structure is used to connect the valve and piping.
2, sealing surface is not easy to wear, abrasion, good sealing performance.

2016-12-10

The high pressure stainless steel and cast steel power plant gate valve

reasonable structure design, the valve performance is good, smooth channel, flow coefficient is small

2016-12-10

the power station Hard seal electric butterfly valve

Nominal size: 50-2000 - mm DN, 1 ~ 78
Structure length: GB, ANSI B16.10. 12221-89
Nominal pressure: PN 1.0 ~ 6.4 MPa Class 150 ~ 300 lb

2016-12-09

The wafer electric butterfly valve

The basic design parameters
Nominal size: 50-2000 - mm DN, 1 ~ 78 ""
Structure length: GB, ANSI B16.10. 12221-89
Nominal pressure: PN 1.0 ~ 6.4 MPa

2016-12-10

Bi-directional Metal-seated Butterfly Valve for power station

high temperature, high pressure valve

2016-12-09

floating type metal sealing ball valves apply for power station

Style: direct to open casting ball valve DN15 ~ 400 mm, 1/2 "to 16"
Through three type casting ball valve DNSO ~ 700 mm, 2 "~ 28"

2016-12-09

stop check valve of power station valves

Purpose
Globe - check valve installed in combined cycle heat on the main steam pipe, prevent the backflow medium, failure occurs when the boiler.

2016-12-10

Change the dual core main steam power station globe valve

Suitable for thermal power plant drainage etc. sealing performance of valve occasions with high requirements.

2016-12-10

high pressure forged steel ball valve for power station

Q41H-100R

Size: DN15 ~ 100 mm
Pressure: PN16.0 ~ 32.0 MPa
Connection: flange, JB/T 2769-92, ANSI B16.5, welding: GB12224-89

2016-12-10

Electric gate valve apply for power station

Z941H-64C

The electric gate valve is suitable for the nominal pressure PN1.6 ~ 16.0 MPa,and the working temperature is - 29 ~ 550 degrees centigrade.

2016-12-10

The power station turbine drive full welded ball valve

Q367F-16

1. The body is composed of steel pipe welding.
2. The stem adopt explosion proof design.
3 .The ball pad the reinforced ptfe.

2016-12-09

Power plant check valve

SDH61Y-320

high temperature valve,high pressure valve.

2016-12-09

Manual gate valve apply for power station

compact structure, reasonable design, good rigidity, smooth channel, small flow resistance coefficient.

2016-12-09

The power station Globe valve

Main characteristics and uses
1, the welding structure is used to connect the valve and piping.
2, sealing surface is not easy to wear, abrasion.

2016-12-09

Vacuum exhaust steam globe valve apply for power station

DJ961HY

high temperature valve ,high pressure valve.

2016-12-09